IE Audi 4.0T V8 EA825 ECU Tune For C8 RS6, RS7, S8, SQ7, SQ8, & RSQ8

$1,499.00

SKU: IESOWC11

SHARE:

Description

IE’s 4.0TT ECU tune for the Audi C8 platform is a total transformation delivering supercar performance and maximized power delivery. With our cutting-edge modern motorsport tuning approach, your twin-turbocharged V8 engine’s potential is fully realized while maintaining total comfort and reliability. Release the hidden power and heighten your driving experience with a simple install from your phone.

APPLE & ANDROID
MOBILE APP

BLUETOOTH TUNING

UP TO
828HP & 862TQ

POWER YOU CAN FEEL

INCLUDES
FUEL OPTIMIZED

91, 93 104, E40, & E85

LEADING FEATURES

  • Horsepower & torque gains maximized
  • Includes Apple & Android Mobile Flashing app
  • 91, 93, 104, E40, & E85 fuel maps included
  • Compatible with all stock hardware
  • Get the most performance with upgraded intake and intercooler
  • Stage 1 Transmission Tune included with ECU purchase
  • Harder and more aggressive launch strategy
  • Brake boost enabled for rolling launch
  • Recalibrated factory boost gauge displays higher boost
  • Rescaled horsepower and torque gauge displays
  • Gauge display needle animations smoothed (less glitchy)
  • Unused ECU tuning strategies activated and tuned
  • Auto start/stop disabled (button turns on instead of off)
  • Neutral/park rev limit raised
  • Enhanced exhaust overrun crackle in sport mode
  • Maximized map scaling for dependable throttle use
  • Boost control reconfigured for smooth and crisp power delivery
  • Optimized EGT for safe fuel ratios and maximized power output
  • Reduced turbocharger lag
  • Road speed limiters removed
  • Engineered for all climates and elevations
  • Direct port OBDII at-home flashing
  • Easy octane switching takes only minutes
  • Read and clear diagnostic/problem codes
  • Easy to use Data-logger

C8 4.0T STAGE 1 ECU TUNE

IE Stage 1 C8 EA825 ECU calibration dramatically increases hidden performance with up to 828HP and 862ft-lbs! IE’s advanced tuning platform releases hidden power, maximizes the drive feel, boost delivery, throttle response, and powerband to completely transform your 4.0TT engine into a supercar powerhouse. Engineered to operate on entirely stock hardware or with an upgraded intake and intercoolers for the most performance.

See performance tab for full performance results & dyno reports


INCLUDED OCTANES

Your IE tune purchase includes multiple fuel options that offer dramatic power increases. Using your IE POWERlink, switch between octanes as often as you like allowing you to run 91/93 pump gas or flash to our race gas 104 or ethanol files for a massive increase in HP & TQ in only minutes.

FULL E85

Flashing the E85 fuel map allows easy fill-ups at the pump without mixing ethanol blends. This ethanol calibration delivers a massive increase in power over regular 91/93 pump gas while keeping mid-range power in check with the factory direct injection (DI) system and avoiding lean conditions, misfires, and power loss. E85 offers amazingly fast and consistent power delivery from the pump and is much less expensive than race gas.

E40 BLEND

Ready to experience an absolute torque monster!? Mixing regular 91/93 pump gas and E85 at a 40% ethanol content (E40) creates a blend that stays within the safe limit of fuel delivery for the factory injectors. This allows the E40 calibration to produce the full torque output available from the twin-turbo V8, resulting in an insane 862ft-lbs of torque that translates to a pull with seat slamming g-forces.

An ethanol content sensor kit is highly recommended when running ethanol blends.

104 RACE GAS

In areas that do not have readily available ethanol or track enthusiasts with accessable race fuel pumps, the included 104-octane race gas file also succeeds in a considerable jump in power over regular pump gas. Sunoco GT260 Plus 104 octane is used to develop this tune and is highly recommended for the best results.


ADVANCED MAPPING

The factory ECU calibration is full of regulations and compromises that limits horsepower/torque and dull the power delivery and throttle feedback. IE calibrators re-tuned the complicated mass flow modeled boost control mapping with advanced strategies to achieve precision boost request targeting that results in unmatched power delivery. The throttle mapping also receives a significant rewrite to deliver a linear and predictable throttle feedback. These refinements result from months and months of fine details that dramatically improves your conneciton to the car with a much sportier and precise feel.

BRAKE BOOST

Commonly used in roll racing, Brake Boosting allows you to build extra turbo boost by applying brake pressure while accelerating. Release the brake pressure for a “rolling launch” and leg up on the competition.

EGT OPTIMIZATION

Exhaust Gas Temperature (EGT) is the measurement of fuel mixtures exiting the exhaust and is used to determine the health of the fuel/air mixture entering the engine. IE engineers have spent countless hours adjusting boost air/fuel ratio, ignition timing angle, camshaft phasing, intake air temps, and much more to develop the proper EGT adjustments for ultimate engine safety without sacrificing power on all octanes.

HARDWARE GUIDE

STAGE 1 COMPATABILITY

PART UPGRADE REQUIREMENT

STAGE 1 TCU TUNE (INCLUDED)

Required

AIR INTAKE

Recommended for the highest power gain

TURBO INLETS

Compatilbe not required

INTERCOOLER

Compatilbe not required

CATBACK EXHAUST

Compatilbe not required

DOWNPIPES

Not Compatible With Stage 1

MAXIMIZED OUTPUT

This is not a simple dyno tune. IE’s in-house calibration systems were used to reverse-engineer the factory ECU mapping on a professional OEM motorsport level. This grants our calibrators access to every ECU mapping parameter and the ability to add custom programming as necessary. Additional sensors and data collection systems are added as required to completely realign all safety protocols and sensors for the new max-performance ECU tune. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world’s only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with power that will keep you smiling every mile!

POWER GAINS

North American Region (NAR) = AKI / Rest Of World (ROW) = RON

STAGE / FUEL HORSEPOWER TORQUE

Stock Audi advertised numbers (RS6/RS7)

591 HP

590 FT-LBS

Stock IE dyno numbers (RS6/RS7)

591 HP

616 FT-LBS

Stage 1 91 AKI / 95 RON

668 HP

768 FT-LBS

Stage 1 93 AKI / 98 RON

690 HP

780 FT-LBS

Stage 1 104 AKI / 108 RON

800 HP

821 FT-LBS

Stage 1 E85

800 HP

745 FT-LBS

Reviews

There are no reviews yet.

Be the first to review “IE Audi 4.0T V8 EA825 ECU Tune For C8 RS6, RS7, S8, SQ7, SQ8, & RSQ8”

Your email address will not be published. Required fields are marked *

x