Front Rotors (pair) JHM 330mm for Cayenne Caliper on C5-A6-S6 4.2L

$795.00

SKU: JHM-1027x330x32

SHARE:

SKU JHM-1027x330x32 Category Tag

Description

The Original Audi Lightweight Rotors engineered and manufactured in the USA since 2010!

Click to enlarge picture
Audi S8 Brake Rotors (Rear) | 2-piece Lightweight

Due to popular demand, all of our 2-piece, lightweight rotors will now come with black anodized rotor hats featuring Type 3, hard anodizing, the highest quality and hardest anodizing available for aluminum. This will make the rotor hats more resistant to fade and wear and will hide brake dust better. Due to popular, demand all lightweight rotor rings will also feature zinc plating. This high quality coating will slow the effects of corrosion and keep your rotor rings looking good through the winters.

IN STOCK AND READY TO SHIP!

FINALLY a low cost front BBK (Big Brake kit) solution for your C5-A6-S6 with the 4.2L V8 that uses the popular Porsche Cayenne caliper (6-piston Brembo) while clearing most OEM 17″ wheels and most aftermarket 17″ wheels as well. We have confirmed fitment on B5 S4 oem wheels (similar to B6 A4 USP wheels) and found that there was a bunch of room. Also we confirmed fitment on the 17″ BBS wheels shown in the picture below.

Click to enlarge picture
Audi Front Rotors/ 330mm, Cayenne Caliper C5/A6/S6

Stock 321mm vs. JHM 330mm 2-piece for the Porsche Cayenne Caliper
-Rotor OD: Stock = 321mm(12.6″), JHM = 330mm(13″) – .4″ larger
-Rotor Thickness: Stock = 30mm(1.18″), JHM = 32mm(1.26″) – thicker
-Rotor Weight: Stock = 21lbs(each), JHM = 19.5lbs(each) – 7% LIGHTER, 1.5lbs less each
-Rotor Cooling Air-gap: Stock = 11mm(.433″), JHM = 15.5mm(.610″) – LARGER for better cooling
-Rotor Cooling Center Fin Design: Stock = Straight Fin, JHM = Airfoil – MORE EFFICIENT for better cooling
-Bolt pattern: – SAME (fits like an OEM rotor would)

Why the Porsche Cayenne caliper? With its 6-piston design and MASSIVE brake pads it is a strong performer. Also it bolts right up to your spindles with NO brackets. All you need is some bolts, nuts, brake lines and JHM rotors and you have a 350mm BBK. Being that it is an OEM part they are readily available and can be found used for great prices.

INCLUDES: 2 – JHM 2-piece Lightweight Slotted Front Rotors.

OPTIONS:
– Go back one section if you need a hardware kit for adapting the calipers to your car (bolts, washers and nuts).
– Go back one section if you need need stainless brake lines that adapt these calipers to the B6/B7 A4.

Outer ring specs:
We worked closely with a race brake manufacturer that supplies many NASCAR racers and a couple major brake kit companies. Due to their expertise we chose to have them build us the outer rings to our specs to fit the B6-B7 S4-A4 with a Cayenne caliper bolted on. 12 attachment points for durability and strength.

Center hat specs:
We CNC machine the Aluminum center hats in house based on their recommended materials and thicknesses for durability. 12 attachment points for durability and strength. We also engrave JHM in them in 3 locations equal from each other, it looks clean and doesn’t jump out or look tacky.

Click to enlarge picture
Audi B8 S4-S5 Brake Rotors (Rear) 2-piece Lightweight

INSTALLATION NOTES AND PICTURES HERE
NOTE: The C5 A6-S6 4.2l V8 spindles sometimes have excess material where the caliper mounts to the spindle at the upper mount point. This takes the caliper out of parallel to the rotor. Check for this by installing the caliper and rotor with no pads and checking that the outer pins are the same distance from the rotor (make sure you have the rotor flat and installed with 5 bolts). If the top pin is much closer or touching you need to shave down the upper mounting point until the caliper is parallel with the rotor. Also you will notice that the caliper is closer to both outer pins vs the outer pins, this is ok and as designed. This outward bias is there to give max clearance for the rotor from the spindle and for optimum performance. Unfortunately this is a mass produced cars and inconsistencies do happen from time to time in the manufacturing of a car. This is a quick fix and once the caliper is parallel the kit will install easily.

Note – This brake upgrade only fits under 17″ wheels or larger. It fits stock 17″ B5 S4 wheels (similar to OEM B6 A4 USP wheels) with NO wheel spacer and most other OEM and aftermarket wheels as well.

Please note: JH Motorsports does not recommend using EBC brake pads with our 2-piece lightweight rotors. Customer have reported and we have found EBC pads leave excessive pad deposits that can cause brake pulsation. Many EBC pads have a break in coating that reacts with the zinc plating used on our rotors

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.

Reviews

There are no reviews yet.

Be the first to review “Front Rotors (pair) JHM 330mm for Cayenne Caliper on C5-A6-S6 4.2L”

Your email address will not be published. Required fields are marked *

x