This flywheel is for existing B7 S4 owners or B6 S4 owners who have already purchased our B7 S4 Performance clutch kit or an OEM B7 S4/RS4 clutch kit. NOTE: This will not work properly with the B6 S4 pressure plate. If you insist on staying with the B6 S4 clutch which has a weaker clamp load than the B7 clutch we can get you an OEM B6 S4 flywheel for this price as well, just ameil us at sales@jhmotorsports.com.
SPECS
– FLYWHEEL – These are the latest and greatest OEM B7 (05.5 and up) flywheels. These are a direct replacement for 05.5 and up B7 S4s and an upgrade for 04-05 B6 S4s. So if you have a B7 or B6 with a beatup or broken flywheel and want the same dual mass flywheel as stock with a brand new OEM clutch this combo is for you. We only sell these OEM flywheels due to the high failure rate of the B6 S4 flywheel so it is best for them to upgrade to B7 flywheels. An added bonus to this upgrade for the B6 S4 owners is that with this flywheel you can now run a B7 S4/RS4 pressure plate that is in our JHM clutch and this OEM replacement kit. The higher clamp load pressure plate from the B7 S4/RS4 is not compatible with the OEM B6 flywheel, so you must run a JHM lightweight flywheel or a B7 S4 OEM flywheel.
INCLUDES THE FOLLOWING -OEM updated B7 26.5lb Flywheel – New pilot bearing (already pressed in). Don’t forget to purchase 8 new flywheel bolts also available in this section, these MUST be replaced.
NOTE: Flywheel to Crankshaft bolts must be torqued to 45 ft lbs plus an additional 90 degrees. Pressure plate to flywheel bolts must be torqued to 18 ft lbs and JHM recommends the use of loctite here as well.
For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.
Reviews
There are no reviews yet.