Flywheel and Clutch Combo (LUK-OEM updated) for B7-RS4

This is a brand new, OEM Dual Mass Flywheel and Clutch Combo for your B7-RS4. This is the same dual mass flywheel and clutch kit that came on your RS4 from the factory.

Why an OEM flywheel and clutch? For some people they, like the added mass that makes it easier to start from a stop with a heavy, dual mass, OEM flywheel. Some also like the whisper quiet operation when the motor is bogged below 1500 rpm. With an OEM clutch, your car will operate just like it did when it came off the showroom floor. Lightweigtht flywheels and performance clutches are not for everyone and we understand this, so we put this combo together for those looking to have brand new, OEM parts.

PARTS INCLUDED:
– 1x OEM Dual Mass Flywheel
– 1x New pilot bearing (already pressed in dual mass flywheel)
– 10x OEM Flywheel to crank bolts
– 1x OEM B7-RS4 pressure plate
– 1x OEM Organic Clutch Disc
– 6x Pressure Plate to Flywheel bolts
– 1x Throwout bearing
– 1x Clutch alignment tool

NOTE: Flywheel to Crankshaft bolts must be torqued to 45 ft lbs plus an additional 90 degrees. Pressure plate to flywheel bolts must be torqued to 18 ft lbs and JHM recommends the use of loctite here as well.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.