IE Audi 3.0T Performance ECU Tune | Fits B8/B.5 S4. S5, C7 A6, A7, Q5

$899.00

SKU: IESOVJ11

SHARE:

Description

IE’s performance EA837 ECU calibrations for the Audi B8/B8.5 and C7 3.0T TFSI engines fully release the power potential in only minutes, all from your phone! Let your S4, S5, A6, A7, or SQ5 put a smile on your face and experience the power and thrills from your new tune as it transforms your car into a supercharged beast!

APPLE & ANDROID
MOBILE APP

BLUETOOTH TUNING

UP TO
548HP & 525TQ

POWER YOU CAN FEEL

INCLUDES
FUEL OPTIMIZED

91, 93, 100, 104, & E40

LEADING FEATURES

IE’s performance EA837 ECU calibrations for the Audi B8/B8.5 and C7 3.0T TFSI engines fully release the power potential without sacrificing reliability or comfort. Thousands of street, dyno, and track miles were torture tested to ensure maximum performance without sacrificing safety. Let your S4, S5, A6, A7, or SQ5 put a smile on your face and experience the power and thrills from your new tune as it transforms your car into a supercharged beast!

  • Horsepower & torque gains maximized
  • Includes Apple & Android mobile flashing app
  • Stock boost control optimized for all conditions
  • 91, 93, 100, & 104 octanes available (95, 98, 104, & 108 RON)
  • E40 ethanol blend available for dual pulley ratios
  • RPM limit raised to 7200RPM (requires DSG tune)
  • Dual pulley RPM limit raised to 7350RPM (requires DSG tune)
  • Optional Exhaust Crackle feature
  • Two-step launch control availible for single & dual pulley
  • Upgraded throttle body support for dual pulley
  • Manual fan control for advanced engine cooling
  • Fuel drain option for easy race gas & ethanol fillups
  • Road speed limiters removed
  • Dual pulley calibrated to accept ported superchargers
  • Optimized air to fuel ratios for maximized CAT safety
  • Engineered for all climates and elevations
  • Direct port OBDII at-home flashing
  • Easy octane switching takes only minutes
  • Upgrade stages to match hardware upgrades
  • Simple on/off feature toggling with POWERlink
  • Read and clear diagnostic/problem codes
  • Easy to use Data-logger

3.0T SUPERCHARGED STAGE 1

IE Stage 1 ECU calibration dramatically increases performance with up to 416HP & 391TQ, transforming your supercharged 3.0L into a truly performance-classed vehicle. Engineered to operate on entirely stock hardware and compatible with basic bolt-ons (intake, exhaust, heat exchanger) without the need to retune.

STAGE 2 SINGLE PULLEY

Stage 2 single pulley files are calibrated for a smaller press-on supercharger pulley delivering up to 492HP with minimal hardware upgrades. The single pulley ratio is achieved by driving the supercharger faster via the smaller pulley. See below for recommended pulley option:

PULLEY STYLE IE PART NUMBER PULLEY SIZE (MM) FINAL RATIO

Press-fit SC pulley

IEBAVJ1C

57.5

2.8217

STAGE 2 DUAL PULLEY

Go all out and maximize the full power potential available from the factory supercharger with a stage 2 dual pulley setup. The maximized dual pulley ratio can be achieved by combining the smaller 57.5mm press-fit supercharger pulley with a 188mm crank pulley -or skip to dual pulley in one product with the single 207mm overdrive crank pulley for up to 548HP! See below for recommended pulley options.

PULLEY STYLE IE PART NUMBER PULLEY SIZE (MM) FINAL RATIO

57.5mm SC & 188mm crank pulley combo

IEBAVJ1C & IEBAVJ7

57.5 & 188

3.2695

207mm crank pulley

IEBAVJ6

207mm

3.2753

Upgrading from Stage 1 to Stage 2 or beyond is easy! With IE, you only pay the difference in tune cost with no extra fees. When you install the required matching hardware, follow the instructions on your IE POWERlink app to purchase the tune upgrade, and you will be blowing away the competition in minutes!

HARDWARE GUIDE

PART UPGRADE STAGE 1 SINGLE PULLEY DUAL PULLEY

DSG TUNE OR CLUTCH UPGRADE

OPTIONAL

HIGHLY RECOMMENDED

REQUIRED

AIR INTAKE

OPTIONAL

OPTIONAL

HIGHLY RECOMMENDED

HEAT EXCHANGER UPGRADE

OPTIONAL

HIGHLY RECOMMENDED

REQUIRED

SUPERCHARGER PULLEY 57.5MM (PRESS-ON)

NOT COMPATIBLE

REQUIRED

REQUIRED WITH 188MM LOWER

CRANK PULLEY 188MM

NOT COMPATIBLE

NOT COMPATIBLE

REQUIRED WITH 57.5MM UPPER

CRANK PULLEY 207MM

NOT COMPATIBLE

NOT COMPATIBLE

REQUIRED WITH STOCK UPPER

HPFP UPGRADE

NOT COMPATIBLE

NOT COMPATIBLE

HIGHLY RECOMMENDED FOR E40 USE

THROTTLE BODY UPGRADE

NOT COMPATIBLE

NOT COMPATIBLE

HIGHLY RECOMMENDED

DOWNPIPES

OPTIONAL

OPTIONAL

OPTIONAL

CATBACK

OPTIONAL

OPTIONAL

OPTIONAL

Dual pulley tune ratio can be acheived by combining press-on supercharger pulley with 188mm crank pulley or with 207mm crank pulley on it’s own. IE does not recommend use of 188mm pulley on it’s own or combining 207mm crank pulley with upper press-on SC pulley.

DUAL PULLEY E40 ETHANOL

Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides the tuning potential for a massive horsepower and torque gain over running conventional gasoline and is more readily available (in most states) and less expensive than race gas. The factory fuel system with an upgraded HPFP (high pressure fuel pump) can support a maximum mix of 2/5ths E85 and 3/5ths 91/93 premium gas to produce an E40 ethanol blend delivering up to an intense 548HP & 525ft-lbs of torque!

Read our how-to and safety guide on blending ethanol HERE

Reviews

There are no reviews yet.

Be the first to review “IE Audi 3.0T Performance ECU Tune | Fits B8/B.5 S4. S5, C7 A6, A7, Q5”

Your email address will not be published. Required fields are marked *

x